Acid And Wear Resistant Plastic

Description

Description of Acid And Wear Resistant Plastic:

Acid and wear resistant plastic refractory has good cold plasticity, small natural drying shrinkage rate, good mechanical strength after drying, excellent abrasion resistance, crack resistance, acid corrosion resistance and thermal shock resistance. It is ideal plastic refractory for garbage incinerator.
Phosphate acid or acidic aluminum phosphate is used as the binder of acid proof and wear resistant plastic refractory, clay clinker, high alumina or corundum are used as aggregate, plastic refractory clay and conservant are added into aggregate to make acid and wear resistant plastic refractory. To increase the wear resistance of plastic refractory, corundum can be used as aggregate, α-Al2O3 fine powder and micro powder can  be used to increase the abrasion resistance of plastic mix.

Physiochemical indexes of acid and wear resistant plastic refractory:

Item	Index
Bulk density g/cm3	≥2.8（110℃,24h）
Crushing strength Mpa	≥80(110℃, 24h)
	≥90(1100℃, 5h)
Modulus of rupture Mpa	≥14(110℃, 24h)
	≥18(1120℃, 5h)
Refractoriness ℃	≥1730
Thermal shock resistance/ times (900℃, water cooling)	≥25
Thermal conductivity (w/m·K)	1.72（350℃）
Abrasion resistance	≤6

 
The Storage of Acid And Wear Resistant Plastic Refractory

Store in cool and dry warehouse, suitable storage environment can prolong the storage period.
Acid and wear resistant plastic refractory not used up should be sealed and stored in warehouse, no impurity or air should enter into it.
Keep from moisture during storage, plastic refractory should not contact with water or rain.
Long term exposure to the sun should be prohibited, keep acid and wear resistant plastic refractory in cool and dry in door environment.